Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 95)

Chapter 2 95

Test Descriptions

TEST_44 - CPD CDMA Release

Description

This test performs a CDMA Base-station-initiated release.

1. A Service Option 2 (or 9) call is attempted, unless a call is already

connected. If the MSUT has not registered, the call attempt may be

unsuccessful and the error message “Failed to establish a call in test

<>” will be displayed. To correct this problem, perform the CPD

Registration test.

2. An attempt is made to end the call.

3. The average power measurement is monitored until its level reaches

-45 dBm or a timer expires. If the average power measurement

reaches -45 dBm or less, the call was successfully terminated.

4. The following measurement results are printed to the TESTS

(IBASIC Controller) screen:

• Land Station Clear <YES/NO>

Pass/Fail Limits Used

•None

Parameters Used

• 9. CPD BID Number

• 11. CPD NID Number

• 12. CPD SID Number

• 18. RT Prot Std [0=95 1=95A 2=TSB74 3=ARIB]

• 19. RT Rate Set Selection [0=9600 1=14400]

• 22. RX RF Level for Signaling (dBm)

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 95