Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 173)

Chapter 4 173

Parameter Descriptions

15. RT High Supply Voltage (Vdc)

This parameter is used to set the MSUT to its highest specified voltage

ratings. The value must be entered in Vdc with a range from 0 to 60.

Parameter 20. RT Test at Extreme Settings [0=no 1=yes] must be set to

“yes” for parameter 15. RT High Supply Voltage (Vdc) to be activated.

The software requires that an GPIB programmable power supply be

used in order to adjust the voltage to the desired value. See “20. RT Test

at Extreme Settings [0=no 1=yes]” on page 178 for more information.

Example

If you desire the power supply voltage set to operate the MSUT at +20%

of the normal (Nominal) supply voltage, and the Nominal Supply

Voltage is 13.2 V, enter 15.8 as the value.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 173