Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 118)

118 Chapter 3

S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm

Pass/Fail Limit (Specification) Descriptions

10. RXA SINAD (dB)

This sets the pass/fail limits used when SINAD is measured at the

audio output of the receiver. Limits must be entered in dB.

Pass/fail limits are determined by using any applicable standard, such

as:

• EIA Standard: RF Sensitivity

Example

If your standard defines the usable sensitivity measurement that

results in 12 dB SINAD at the audio output of the receiver, you would

enter 12 as the Lower Limit.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 118