Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 144)

144 Chapter 3

S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm

Pass/Fail Limit (Specification) Descriptions

36. TXA Signaling Tone Deviation (kHz)

This sets the pass/fail limits for the signaling tone’s peak frequency

deviation. Upper and lower limits must be entered in kHz.

Pass/fail limits are determined by using any applicable standard such

as:

• EIA/TIA Standard: Signaling Tone (ST)

Example

If you desire that the nominal peak frequency deviation of the carrier

produced by the signaling tone should be

±8 kHz with a ±10% tolerance,

enter 7.2 as the Lower Limit and 8.8 as the Upper Limit.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 144