Carrier 38TXA Guide Guide de l'utilisateur Page 123

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 214
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 122
Chapter 3 123
Pass/Fail Limit (Specification) Descriptions
15. TXA Compressor Tracking Error >0dB (dB)
15. TXA Compressor Tracking Error >0dB (dB)
This sets the pass/fail limits used when the compressor output level is
measured at input levels above the 0 dB reference level. The output
voltage tolerance should be within the pass/fail limits. Lower and
Upper Limits must be entered in dB.
Pass/fail limits are determined by using any applicable standard, such
as:
EIA/TIA Standard: Compressor
Example
If you desire the output voltage tolerance below the 0 dB reference level
to be
±0.5 dB, enter 0.5 as the Lower Limit and 0.5 as the Upper
Limit.
Vue de la page 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 213 214

Commentaires sur ces manuels

Pas de commentaire