Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 122)

122 Chapter 3

S:\agilent\83217\OPT001\BOOK\CHAPTERS\passfail.fm

Pass/Fail Limit (Specification) Descriptions

14. TXA Compressor Tracking Error <0dB (dB)

This sets the pass/fail limits used when the compressor output level is

measured at input levels below the 0 dB reference level. The output

voltage tolerance should be within the pass/fail limits. Lower and

Upper Limits must be entered in dB.

Pass/fail limits are determined by using any applicable standard, such

as:

• EIA/TIA Standard: Compressor

Example

If you desire the output voltage tolerance below the 0 dB reference level

to be

±1 dB, enter −1 as the Lower Limit and 1 as the Upper Limit.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 122