Carrier 38TXA Guide Guide de l'utilisateur télécharger pdf (Page 170)

170 Chapter 4

S:\agilent\83217\OPT001\BOOK\CHAPTERS\paramtr.fm

Parameter Descriptions

12. CPD SID Number

This parameter sets the mobile station’s SID (System ID) number. The

mobile station receives both SID and NID (Network ID) numbers from

the Test Set, and compares them with its home SID/NID to determine if

it is roaming. This parameter, as well as CPD NID Number, do not have

to match the mobile station’s programmed values to register or make a

call, unless the mobile station is programmed to operate “home only”.

If the SID and NID values programmed into the mobile station’s NAM

(number assignment module) match the values entered in the

parameters CPD NID Number and CPD SID Number, the mobile

station’s roam indicator will not be lit after the mobile station has

acquired service from the Test Set.

Example

If you want the mobile station to be tested in a non-roaming

environment, enter the SID that is programmed into the mobile

station’s NAM into this parameter. You must also enter the

corresponding NID in the parameter CPD NID Number.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 213 214

Pas de commentaire

Carrier 38TXA Guide Guide de l'utilisateur Page 170