Carrier Edge TP-PHP Manuel d'instructions télécharger pdf (Page 8)

INSTALLATION

UNIT DAMAGE HAZARD

Failure to follow the recommended wiring practices could result in

damage to the wall control and personal property.

Improper wiring or installation may damage AC/HP Control. Check

to make sure wiring is correct before proceeding with installation or

turning on power.

CAUTION

Installation Notes:

S No part of the control should be installed directly outdoors or in a cabin-

et outdoors.

S Never remove the thermostat board from the plastic housing. Doing so

could warp and damage the components on the board.

S The control assembly should be mounted before wires are attached.

S During thermostat installation, provide sufficient excess wiring behind

the mounting plate. Coil the wiring, creating a service loop, and place in

mounting box or behind the wall to remove strain against the terminal

strip. See Fig. 2.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 67 68

Pas de commentaire

Carrier Edge TP-PHP Manuel d'instructions Page 8