Carrier TP-NHP Manuel d'utilisateur télécharger pdf (Page 23)

A07220

Fig. 15 − Reattach Display Module

9. Turn on power to equipment. On power up, all display segments will

light for 5 sec. For the next 5 sec a 2−digit code appears on large display

which identifies AC/HP Control configuration. Refer to Option 33.

a. AC — 1−stage air conditioner, AC, with furnace or fan coil

b. HP — 1−stage heat pump, HP only with fan coil

c. H — heating only system, furnace only or fan coil with electric

heat only

d. C — cooling only system, AC with fan coil

e. H2 — 2−stage heat pump with fan coil

f. A2 — 2−stage air conditioner with fan coil or furnace

Set AC/HP Control Configuration

Configuration options enable the installer to configure the thermostat for a

particular installation. Most are not presented to the homeowner and therefore

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Pas de commentaire

Carrier TP-NHP Manuel d'utilisateur Page 23