Carrier TSTATCCPSE01 Manuel d'instructions télécharger pdf (Page 11)

SYMPTOM: When using 4 wires (R, G, W, Y),

the air conditioning equipment tries

repeatedly to turn on, but cannot. At

times the display dims or disappears.

CAUSE: There is not enough power available

to "power share".

REMEDY: Connect a 270 ohm, 10 watt power

resistor at the furnace as shown below.

TROUBLESHOOTING

Page 10

SYMPTOM: The air conditioning does not

attempt to turn on.

CAUSE: The compressor timer lockout may

prevent the air conditioner from

turning on, for a period of time.

REMEDY: Consult the Owner's Manual in

the Setup section to defeat the

cycles per hour and compressor

timeguard.

SYMPTOM: The display is blank.

CAUSE: Lack of proper power.

REMEDY: Make sure power is turned on to

the furnace and 24vac between R & W.

If C is used, 24vac between R & C.

R G W Y C

TR300-10w

R G W Y C

TR300-10w

For Problem A/C For Problem Heat

1 2 ... 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire