20
4230 4380 1670 2127 3747 250
4754 4904 1670 2127 4278 250
4230 4380 1880 2294 3747 250
4754 4904 1880 2294 4278 250
4230 4380 2054 2781 3754 250
4754 4904 2054 2780 4278 250
4230 4380 2124 2879 3754 250
4754 4904 2124 2878 4280 250
4919 5104 2530 3276 4278 460
5525 5710 2530 3276 4884 460
4919 5104 2530 3343 4278 460
5525 5710 2530 3343 4884 460
The width (B) and height (C) dimensions may be modied, if the variable frequency drive is used. Please refer to the relevant chapters.
* Assumes that both cooler and condenser nozzles are on the same end of the chiller.
** 1 or 3 pass length applies, if either (or both) cooler or condenser is a 1 or 3 pass design.
*** Size < 50-52: maximum height shown is for units with starter cabinet
Size ≥ 50-52: maximum height shown is for units with high-voltage terminal box
See dimensional drawings for each unit for more details
**** Clearance for oat valve variable depending on the unit height - see Fig. 2 - “19XR Machine components”, item No. 28.
610 mm
1219 mm
915 mm
1. Motor service space
2. Recommended clearance above the machine
Clearances required
D. Clearance area for heat exchanger tubes
E. Clearance for oat valve, variable depending on the unit
height - see chapter 2.3, Fig. 2 ”19XR Machine
components” - item No. 28.
3.3.3.2 - Dimensions/clearances
For units with marine waterboxes, please refer to the dimensional drawings supplied with the unit.
Non-certied drawings. Refer to the certied dimensional drawings supplied with the unit or available on request, when designing an installation.
Commentaires sur ces manuels